Downloaded Ring Tone - Cisco 501G Administration Manual

SPA and Wireless IP Phone Field Reference
Info Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
Peer Phone
Duration
Packets Sent
Packets Recv
Bytes Sent
Bytes Recv
Decode Latency
Jitter
Round Trip Delay
Packets Lost
Packet Error
Mapped RTP Port
Media Loopback

Downloaded Ring Tone

Parameter
Status
Ring Tone 1
Ring Tone 2
Description
Phone number of the internal phone.
Duration of the call.
Number of packets sent.
Number of packets received.
Number of bytes sent.
Number of bytes received.
Number of milliseconds for decoder latency.
Number of milliseconds for receiver jitter.
Number of milliseconds for delay.
Number of packets lost.
Number of invalid packets received.
The port mapped for Real Time Protocol traffic for the
call.
If the call is a loopback call, displays the loopback mode
(source or mirror) and type (media or packet). If the call
is not loopback, the field appears blank.
Description
Indicates whether the phone is downloading a ring
tone (and from where) or if it is idle.
Information about the user downloaded ring tone 1:
name, size, and time-stamp of the tone.
Information about the user downloaded ring tone 2:
name, size, and time-stamp of the tone.
B
184