Configuring The Phone Name; Configuring Voice Mail; Configuring Internal Voice Mail For Each Extension (When Using Spa400 For Voice Mail) - Cisco 501G Administration Manual

Customizing Cisco SPA and Wireless IP Phones
Configuring Phone Information and Display Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco SPA500 Series and WIP310 IP Phone Administration Guide

Configuring the Phone Name

Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under General, enter the Station Name, or name for the phone. This name shows
up in the corporate directory.
Click Submit All Changes. The phone reboots.

Configuring Voice Mail

To configure the phone to connect to voice mail:
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Phone tab.
Under General, enter the Voice Mail Number. This is the internal or external phone
number or URL to access the voice mail system. If using an external voice-mail
service, the number must include any digits required to dial out and any required
area code.
Click Submit All Changes. The phone reboots.
Configuring Internal Voice Mail for Each Extension (When Using
SPA400 for Voice Mail)
Log in to the web administration interface.
Click Admin Login and advanced.
Click the Ext <number> tab.
Under Call Feature Settings, enter the voice mail line number and phone extension
in the Mailbox ID field. For example, 2101 indicates that the SPA400 voice mail
server is configured on the SPA9000 Line 2, phone extension 101.
3
33