Getting Started
Network Configurations
Network Configurations
NOTE
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
The Cisco SPA500 Series and Wireless-G IP Phones support Session Initiation
Protocol (SIP) or Smart Phone Control Protocol (SPCP). SPCP is supported only on
the SPA500 Series IP Phones.) You can use the Cisco SPA500 Series and
Wireless-G IP Phones as part of a Cisco SPA9000 Voice System phone network,
or with any vendor's IP PBX system that supports SIP. The SPA500 Series IP
phones can be used as part of a Cisco SPA9000 Voice System phone network, a
SIP network, or as part of the Cisco Unified Communications 500 Series for Small
Business.
SPA500 Series
IP Phones
IP
PSTN
Gateway
Analog
Phone Lines
Figure 1 Network Configuration Example
Using the Cisco SPA500 Series and Wireless-G IP Phones as part of a Cisco
SPA9000 Voice System Network provides seamless integration of advanced
features, such as paging, call pickup, and shared line appearances.
WIP310
Smart
IP PBX
Switch
Wireless
Router
Integrated
Access Device
IAD
Internet
Analog Phones
or Fax Machines
1
4