Call Progress Tones; Distinctive Ring Patterns - Cisco 501G Administration Manual

Configuring Regional Parameters and Supplementary Services

Call Progress Tones

Call Progress Tones

Distinctive Ring Patterns

NOTE
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
For definitions of all call progress tones, see
page 205.
Ring cadence defines the ringing pattern that announces a telephone call.
The WIP310 has only eight distinctive ring pattern fields.
The pattern is:
length(on/off)
where:
• Length: The total length of the ring
• On: The number of "on" seconds
• Off: The number of "off" seconds.
Example 1: Normal Ring
60(2/4)
• Number of Cadence Sections = 1
• Cadence Section 1: Section Length = 60 s
• Number of Segments = 1
• Segment 1: On=2s, Off=4s
• Total Ring Length = 60s
Example 2: Distinctive Ring (short,short,short,long)
60(.2/.2,.2/.2,.2/.2,1/4)
• Number of Cadence Sections = 1
• Cadence Section 1: Section Length = 60s
"Call Progress Tones" section on
7
133