Cisco 501G Administration Manual page 27

Getting Started
Using the Web Administration User Interface
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
To perform these tasks...
Customize individual extension parameters,
including:
•
Shared line/call appearance
•
NAT settings
•
SIP settings such as SIP debug and SIP port
•
Mailbox ID, MOH server
•
Voice mail server
•
Proxy and registration information
•
Subscriber information such as user ID and
password
•
Audio settings
•
Dial plan settings
Customize user-level parameters, including:
•
Call forward
•
Speed dial
•
Supplementary services
•
Web information (RSS newsfeeds)
•
Traffic information settings
•
Audio volume
•
Phone GUI settings
View and change parameters for Unit 1 and Unit 2
(applicable only to SPA500 Series IP Phones with
one or two SPA500S attendant consoles
attached)
On the web UI, click the ...
Ext tab
(1-6, depending on phone model)
See Chapter 2, "Configuring
Lines and Extensions."
User tab
See Chapter 3, "Customizing
Cisco SPA and Wireless IP
Phones."
Attendant Console tab
See Chapter 9, "Configuring the
Cisco SPA500S Attendant
Console."
1
16