Cisco 501G Administration Manual page 235

SPA and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
Text Logo
BMP Picture Download URL
Select Logo
Select Background Picture
Description
Text logo to display when the phone boots up. A
service provider, for example, can enter logo text as
follows:
•
Up to 2 lines of text
•
Each line must be fewer than 32 characters
•
Insert a new line character (\n) between lines
•
Insert escape code %0a
For example, "Super\n%0aTelecom" will display:
Super
Telecom
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page
URL locating the bitmap (.BMP) file to display on the
LCD background.
For more information, see the
Information and Display Settings" section on
.
page 32
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page
Select from Default, BMP Picture, Text Logo, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page
Select from Default, BMP Picture, or None.
Defaults to Default.
NOTE Not applicable to the WIP310. On the
SPA525G, this setting is located in the User tab. See
Screen (SPA525G), page
B
257.
"Configuring Phone
257.
257.
257.
224