Monitoring The Cisco Spa500S - Cisco 501G Administration Manual

Configuring the Cisco SPA500S Attendant Console

Monitoring the Cisco SPA500S

Monitoring the Cisco SPA500S

Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
Server Type
Test Mode Enable
Attendant Console Call
Pickup Code
BLF List URI
Unit 1 Key 1-32
To display the status of the Cisco SPA500S, click the Attendant Console Status link
on the GUI. The status of each attendant console attached (Unit 1 and Unit 2) is
shown. Parameters are read-only.
Description
Selects the type of server used (SPA9000, BroadSoft,
or Asterisk).
Enables or disables test mode. When test mode is
enabled, the LEDs are turned on when keys are
pressed, going from off to green to red, and back to off.
In test mode, when all the buttons on the attendant
console are returned to off, all the keys become
orange. The phone must be rebooted after the test is
completed.
The star code used for picking up a ringing call.
Defaults to *98.
Automatically configures BLF subscriptions for all
users on a monitored list.
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA500S unit. Keywords and values are
case-sensitive. The configuration script is described in
"Unit/Key Configuration Scripts" section on
.
page 168
9
173