Internet Connection Type And Static Ip Settings - Cisco 501G Administration Manual

SPA and Wireless IP Phone Field Reference
System Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
SPA525-protocol (SPA525G
only)
SPA525-auto-detect-sccp
(SPA525G only)

Internet Connection Type and Static IP Settings

Parameter
Internet Connection Type
Static IP
Netmask
Gateway
LAN MTU
Description
Allows you to choose the type of protocol for the
phone:
•
SIP—Session Initiation Protocol. Choose if the
phone is used with a SIP call control system, such
as the SPA9000 or a SIP call control system from
another provider such as BroadSoft or Asterisk.
•
SPCP—Smart Phone Control Protocol. Choose if
the phone is used with a Cisco Unified
Communications Series server, such as the Cisco
Unified Communications 500 Series for Small
Business.
Choose if the phone should automatically detect the
type of protocol used on the network to which it is
connected. If set to yes, the phone automatically
discovers if it is connected to a call control system
using SPCP.
Description
Choose the type of internet connection:
•
DHCP
•
Static IP
•
PPPoE (not applicable to WIP310)
If static IP was chosen as the type of internet
connection, displays the static IP address assigned to
the phone.
If static IP was chosen as the type
Default router IP address. Blank if DHCP assigned.
LAN Maximum Transmission Unit size. Default value:
1500.
B
186