Supplementary Services - Cisco 501G Administration Manual

SPA and Wireless IP Phone Field Reference
Phone Tab
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
Call Back Active LED

Supplementary Services

Enable or disable the corresponding supplementary services on the phone. A
value of "yes" indicates enabled; "no" indicates disabled.
Parameter
Conference Serv
Attn Transfer Serv
Blind Transfer Serv
DND Serv
Block ANC Serv
Call Back Serv
Block CID Serv
Secure Call Serv
Cfwd All Serv
Description
Call Back operation is currently active on this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=s.
Description
Enable/disable Three way conference service.
Defaults to yes.
Enable/disable attended-call-transfer service.
Defaults to yes.
Enable/disable blind-call-transfer service.
Defaults to yes.
Enable/disable do-not-disturb service.
Defaults to yes.
Enable/disable block-anonymous-call service.
Defaults to yes.
Enable/disable call-back (a.k.a. repeating dialing)
service.
Defaults to yes.
Enable/disable blocking outbound Caller-ID service.
Defaults to yes.
Enable/disable secure-call service.
Defaults to yes.
Enable/disable call-forward-all service.
Defaults to yes.
B
230