Miscellaneous Line Key Settings - Cisco 501G Administration Manual

SPA and Wireless IP Phone Field Reference
Phone Tab
NOTE
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
Subscribe Expires
Subscribe Retry Interval
Subscribe Delay
Server Type

Miscellaneous Line Key Settings

Does not apply to the WIP310.
Parameter
SCA Line ID Mapping
Description
Specifies how long the subscription remains valid.
After the specified period of time, elapses, the IP
phone initiates a new subscription.
Defaults to 1800.
Specifies the length of time to wait to try again if
subscription fails.
Length of delay before attempting to subscribe.
Defaults to 1.
Selects the type of server used (SPA9000, BroadSoft,
or Asterisk).
Description
Specifies the shared call appearance line ID mapping.
Choose Vertical First or Horizontal First. Each LED can
hold two calls and the first call on an LED makes it light
up. Horizontal first means the second call makes the
same LED flash. Vertical first means the second call
lights up the next LED.
For example, if Extension 101 is assigned to two LEDs,
and Vertical First is selected, the second call on
Extension 101 lights up the second LED. The third call
makes the first LED flash, and the fourth call makes the
second LED flash.
If Horizontal First is selected, the second call on
Extension 101 makes the first LED flash. The third call
lights up the second LED, and the fourth call makes the
second LED flash.
B
227