Setting Redial (Interval And Counter) - Toshiba DP80F Operator's Manual

Setting Redial (Interval and Counter)

If the destination facsimile you
1
called is busy, your facsimile will
automatically redial the number
up to the number of attempts set
by this procedure. In addition,
Press:
your DP80F/DP85F will try to re-
dial every 1 minute by default. If
desired, you may change these
redial settings.
Redial Interval
The Redial Interval sets the
length of time between redial at-
tempts. The default redial inter-
val is 1 minute. You may
change the interval from 1 to 15
minutes.
Redial Counter
The Redial Counter sets the
number of redial attempts. The
default setting is 5. You may
change the number of redials
from 0 to 14 attempts.
2
Display the REDIAL Enter the Redial
MODE Menu Interval
Enter the interval value (1 to 15)
in minutes.
+
+
+
Then press:
+
The following screen is dis-
played.
INTERVAL (MINUTES) REDIAL COUNT
(1-15) [ 1] (0-14)
3
Enter the Redial
Counter
Enter the redial counter value (0
to 14).
Then press:
The following screen is dis-
played.
COMPLETED
[ 5]
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
4
Select Another
SETUP Item, or ...
After completing this Configura-
tion Setting, you may continue
to select other settings referring
to their associated pages for in-
structions, or press
to exit the Configuration Setting
mode and return to the Standby
Mode.
61