Power Saver Operation - Toshiba DP80F Operator's Manual

Power Saver Operation

This function allows you to mini-
1
mize power consumption by
turning power off to portions of
the machine (as selected). If
the Power Saver function is ON,
Press:
a warm up period is needed be-
fore printing occurs. This fac-
simile has two Power Saver
modes, Super Power Saver and
Printer Power Saver.
Super Power Saver turns virtu-
ally all power off to minimize
power consumption. Select one
of three modes, Automatic,
Manual or OFF.
Printer Power Saver turns only
the fuser section off during the
time period selected.
NOTE:
When the machine is in the
Super Power Saver mode, it
will exit from the Super
Power Saver mode when
any of the following occurs.
- The machine receives a
facsimile,
- Option handset or exter-
nal telephone handset is
lifted,
- Document is loaded into
the document tray,
- is pressed, or
- PC has accessed the
machine.
50
2
Display the POWER
SAVER Menu
Select the desired Power Saver
Mode.
+
+
SUPER P.S.
2.MANUAL
3.OFF
+
+
Go to Step 3.
POWER SAVER
01.SUPER P.S.
02.PRINTER P.S.
PRINTER P.S.
1.ON
Go to Step 5.
3
Select the Power
Select the Super
Saver Mode Power Saver Option
Select the desired Super Power
Saver Option.
+
(to select Super Power
(to select Automatic mode)
Saver mode)
ENTER TIME
(1-60)
Go to Step 4.
1.AUTOMATIC
(to select Manual mode)
+
In manual mode, you can acti-
vate Super Power Saver using a
(to select Printer Power
key on the Operation Panel.
Saver mode)
Go to Step 7.
2.OFF
Go to Step 7.
4
Enter the Start Time
Period
Enter the time period (in min-
utes) for standby operation prior
to entering the Super Power
Saver mode.
[ 3]
ENTER TIME
(1-60)
When the correct time period is
displayed, press:
COMPLETED
(to select OFF)
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
Go to Step 7.
[ 3]