Redialing; Automatic Redialing; Manual Redialing Direct Transmission - Toshiba DP80F Operator's Manual

Redialing

Automatic Redialing

When the line of the remote This function enables you to re-
party is busy, the facsimile will dial the number last dialed us-
automatically redial the remote ing this facsimile to transmit a
party up to the set number of document.
times with intervals of the set
length (see page 61). WARNING:
If the line is not connected after
the set number of redialing at-
tempts, the facsimile will record
a LINE BUSY.
Confirm the facsimile number of
the remote party and repeat the
transmission procedure.
NOTE:
102

Manual Redialing Direct Transmission

1
To enter the On-hook Dialing
(Monitor Speaker Dialing) mode,
press:
If you press , the
facsimile will clear the fac-
simile number registered
and lose the manual redial
TEL NUMBER=(MAX128)
capability.
[
This feature will not function
with numbers dialed using
the optional handset or an
external telephone.
2
Press the MONITOR Press the REDIAL
Key Key
Press:
The last number dialed is dis-
played. The display varies de-
pending on the dialing method
used.
]
The displayed number is imme-
diately redialed.
TEL NUMBER=(MAX128)
[0559761234
If no number is registered as a
redial number, the screen below
is displayed for 2 seconds, then
returns to Step 1.
TEL NUMBER=(MAX128)
NUMBER NOT LISTED
3
Redial the Remote
Party
When you hear the answering
tone, press . If the re-
mote party answers the phone,
pick up the handset (optional).
Inform the remote party that you
wish to send a document.
Upon hearing the facsimile
tone, press:
]
When the transmission is com-
pleted, the facsimile returns to
the Standby Mode.
MAY-17 09:43 AM 100%
AUTO RECEIVE