Table of Contents
Advertisement
Abbreviated Dialing
Once an Abbreviated Dial Num-
1
ber is programmed with a valid
remote facsimile location, that
location can be accessed by re-
calling the corresponding Abbre-
Press:
viated Dial Number.
The document must be loaded
and the resolution and contrast
set before a transmission using
Abbreviated Dialing (see pages
83 and 84).
90
2
Press the SPEED
DIAL Key
Enter the Abbreviated Dial Num-
ber (1 to 999) assigned to the
desired party.
+
ABB. NUMBER
(1-999)
[
]
NOTE:
When an incorrect number is
entered, use
preceding digits, or press
from the beginning.
Example of Abbreviated Dial
Number, 10:
ABB. NUMBER
(1-999)
3
Enter the
Press the START Key Tray
Abbreviated Number
When the correct number is dis-
played, press:
The Abbreviated Dial Number
and the name of the party will
appear on the LCD display for
about 2 seconds.
Your facsimile will automatically
start scanning the document
into memory (if enabled). While
scanning, the facsimile dials,
connects, and starts transmis-
sion.
to delete
ABB. NBR=
LONDON OFFICE
once to start over
Displayed for 2 seconds
SCANNING DOC
FILE NBR =
During scan to memory
[ 10]
MAY-17 09:43 AM
AUTO RECEIVE
During transmission
NOTE:
When the number entered
(within
the
range
through 999) is not prepro-
grammed with a specific par-
ty's facsimile or telephone
number, the message "NUM-
BER NOT LISTED" is dis-
played for 2 seconds and
then the facsimile returns to
the screen in Step 1.
10
ABB. NBR=
NUMBER NOT LISTED
Displayed for 2 seconds
P001
091
99%
of
1
10
Advertisement
Chapters
Table of Contents
