Set Contrast; Redial - Toshiba TF 851 User Manual

Transmit documents

Set contrast

Some characters cannot be transmitted if
the print on documents is weak or if
colour print is used. In this case, you
should set contrast to DARK.
On the other hand, there are documents
which contain text in coloured fields. In
this case, you should set contrast to
LIGHT.
You can assess the effect of this setting -
and thus also the result of your fax
transmission - via the local copy (see
page 20) .

Redial

If it was not possible for your fax message
to be sent, this may be due to various
reasons (please read page 75). One
reason may be that the other fax machine
is busy. In this case, it would make sense
to call your partner again at a later time.
This is done automatically by your fax; it
attempts to send the fax message again
approx. every three minutes.
If you have established a call via
the TONE key, you can activate
the redial function by pressing
the REDIAL key.
30
GB
Transmit documents
STD NORMAL
AUTO RX
RESIDUAL MEMORY 100%
CONTRAST
1. NORMAL DOCUMENT
2. DARK DOCUMENT
3. LIGHT DOCUMENT
ENTER
STD DARK
AUTO RX
RESIDUAL MEMORY 100%
15.03.1995 WED 19:56
AUTO RX
RESIDUAL MEMORY 99%
REDIAL
PAUSE
WAITING TO REDIAL
ENTER FILE NBR OR
PRESS [>]
MENU
POLLING RESERVE
FILE NBR : XX
MENU
ENTER
Load original
Remember:
Printed side face down
Document ready
Press "CONTRAST" ...
Make your selection
Select a menu item (Example:
Dark document)
Confirm with ENTER
After transmission:
Contrast returns to idle status.
Press until...
....the next job is displayed
Scroll forward or backward
-or-
Confirm with ENTER
TOSHIBA TF 851