Browse Folders - continued
Saving the Phonebook
The device phonebook opened
1
by TOSHIBA Viewer (default
name TOSHIBA) is a temporary
"working"
file.
Every
time
TOSHIBA Viewer is opened, the
program accesses the attached
facsimile and reads the current
phonebook settings.
You can store the phonebook
settings within TOSHIBA Viewer
or save as a set file on your
hard disk.
Select the device and click the Setup device phonebook button.
This is useful when performing a
full memory clear or upgrading
"Reading data from device" appears as Viewer interrogates the at-
the machine firmware because
tached facsimile.
you can easily re-program the
machine's
phonebook
by
downloading
the
stored
phonebook file.
Toshiba Phonebook Setup appears.
Open the Device folder
2
Create the new phonebook file
Setup device
phonebook
Double-click on Add settings file.
A "New settings" file is created. Enter an appropriate name for the
new settings file.
To copy the current device phonebook settings to the new settings
file, left-click and hold on the device phonebook file (e.g.
"TOSHIBA") then drag it to the new settings file (e.g. "LA Office
Phonebook) and release the left mouse button.
NOTE:
Initially, your mouse pointer will become a "circle with diagonal
line". Upon reaching the desired phonebook file, the pointer will
take the form of an "address label".
mouse button, the contents of the device phonebook file are
copied to the new phonebook file.
To save the new settings within TOSHIBA Viewer, go to Step 3a.
To save the new phonebook as a file on your local hard disk. go to
Step 3b.
Upon releasing the left
265