Device Configuration; Configuration Summary - Toshiba DP80F Operator's Manual

- DEVICE CONFIGURATION

Configuration Summary

This facsimile has many user
1
adjustable settings.
Each of these configuration set-
tings is discussed in detail
throughout the remainder of this
Press
section.
Screen displays.
Use the following procedures to
access one or more of these
configuration settings.
Press
SETTINGS. The Default Set-
tings sub-menu displays.
Press
SETTINGS. The Machine Set-
tings sub-menu will now be dis-
played.
NOTE: Only 1 selection can be
2
Select the Desired Configuration Setting (01-11)
Enter the
Configuration Menu
. The initial Menu
Press
Configuration Setting 01 through 11 from the list below. The detailed configuration procedure for each
setting is shown in parentheses after the configuration setting.
MENU
1.FAX FEATURES 01. SPEAKER VOLUME - (Page 46) - Sets the Bell Ringer, Alarm Tone, Key Touch Tone and
02. POWER SAVER - (Page 50) - Configures the machine's Super Power Saver function for Auto-
to enter DEFAULT
03. DEPARTMENT CODE - (Page 52) - Enables, Disables* and Configures up to 50 Department
DEFAULT SETTINGS
1.MACHINE SETTINGS
04. ACCOUNT CODE - (Page 56) - Enables or Disables* a 4-digit Account Code entry.
05. LINE MONITOR - (Page 57) - Enables or Disables* a Line Monitor function.
to enter MACHINE
06. RECEIVE INTERVAL - (Page 58) - Sets an interval for the machine to wait (0 - 14 min.) after
07. ECM - (Page 59) - Enables or Disables* an ECM function.
MACHINE SETTINGS
08. SORT COPY - (Page 60) - Enables or Disables* a Sort Copy function.
01.SPEAKER VOLUME
09. REDIAL MODE - (Page 61) - Sets the number of redials (0-14) (5*) and redial interval (1min.-
02.POWER SAVER
03.DEPARTMENT CODE
04.ACCOUNT CODE
10. RECEPTION MODE - (Page 62) - Configures FAX*, FAX/TAD, TEL/FAX or Manual reception
05.LINE MONITOR
06.RECEIVE INTERVAL
07.ECM
08.SORT COPY 11. COPY REDUCTION - (Page 64) - Configures the machine's Copy Reduction function for Auto or
09.REDIAL MODE
10.RECEPTION MODE
11.COPY REDUCTION
NOTE: * indicates the factory default setting.
displayed at one time.
or until the desired Configuration Setting is displayed or enter the desired
Monitor volume (0-7) (5*) for the machine.
matic/Manual* or Off operation and Printer Power Saver function for On or Off.
Codes.
making four consecutive dialings.
15min.) (1*min.).
modes.
Off* operation.
45
45