Setting Redial (Interval And Counter) - Toshiba e-STUDIO170F Owner's Manual

Setting Redial (Interval and Counter)

If the destination facsimile you
1
called is busy, your facsimile
will automatically redial the
number up to the number of at-
tempts set by this procedure.
Press:
In addition, your e-
STUDIO170F will try to redial
every 1 minute by default. If
desired, you may change these
redial settings.
Redial Interval
The Redial Interval sets the
length of time between redial
attempts. The default redial in-
terval is 1 minute. You may
change the interval from 1 to
15 minutes.
Redial Counter
The Redial Counter sets the
number of redial attempts. The
default setting is 5. You may
change the number of redials
from 0 to 14 attempts.
NOTE:
Whether or not the Redial
Setting can be performed
depends on each country/
region.
2
Display the REDIAL
MODE Menu
Enter the interval value (1 to
15) in minutes.
MENU
+
+
+
Then press:
+
The following screen is dis-
INTERVAL (MINUTES)
played.
(1-15) [ 1]
REDIAL COUNT
(0-14)
3
Enter the Redial Enter the Redial
Interval Counter
Enter the redial counter value
(0 to 14).
Then press:
NOTE:
When 0 is set, the Auto-
matic Redialing does not
function.
The following screen is dis-
[ 5]
played.
COMPLETED
Displayed for 2 seconds
Returns to display the SETUP
menu screen.
4
Select Another
SETUP Item, or ...
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
STOP
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
6 1