Recording Paper Installation (Optional Recording Paper Tray) - Toshiba DP80F Operator's Manual

Recording Paper Installation (Optional Recording Paper Tray)

Remove the Optional
1 2
Recording Paper
Tray
73
Remove the Optional Recording Remove
Paper Tray. Cover.
24
3
Remove the Press Down the
Optional Tray Cover Paper Pressure Plate
74
the Optional Tray Press the Paper Pressure Plate
down until it clicks.
4
Prepare Recording
Paper Sheets
75 32
Prepare new recording paper
sheets by holding both ends
and flexing several times.
This will separate the sheets
and provide optimum feeding.
Align the stack so that all four
corners are neatly aligned.
Be sure to load the recording
paper in accordance with any
paper manufacturer's printing
side instruction. Some papers
have a preferred image side.
This image side should be
placed face up in the Recording
Paper Tray.
NOTE:
There are two types of the
Optional Recording Paper
Tray, one for A4-size paper
and another for letter-size
paper. Use the Tray meeting
your paper size.
5
Install the Recording
Paper
76
Place the recording paper stack
into the tray.
NOTES:
• Do not exceed the upper
stack limit line as this may
cause paper misfeeds.
• Make sure that the paper is
seated under the two sepa-
ration claws on the back side
of tray.
• Be careful not to damage the
claws of the Recording Pa-
per Tray.
• Do not add paper on top of
the paper already in the ma-
chine.