Line Monitor - Toshiba DP80F Operator's Manual

Line Monitor

This function is used to set the
1
facsimile's speaker ON in order
to monitor the phone line for one
communication only. This func-
tion is mainly used to confirm di-
Load the document face down
aling and phone line status.
in the Document Support (see
page 82).
You can activate this option
when programming an Abbrevi-
Adjust the resolution and con-
ated Dial Number (page 65) or
trast if desired (see pages 83
One Touch Dial Key (page 71) if
and 84).
communication with a certain re-
mote party always requires this
option.
184
2
Load the Document
Press:
MAY-17 09:43 AM 100%
AUTO RECEIVE
LINE MONITOR
2.OFF
1.ON
3
Display the LINE Select the Option
MONITOR Menu
Turn ON the monitor speaker by
pressing:
+
+
MAY-17 09:43 AM 100%
ENTER TEL NUMBER
4
Enter the Facsimile
Number
Enter the number of the remote
facsimile using any of the fol-
lowing dialing methods or you
may designate another option at
this point.
• One Touch Key Dialing
... See page 89
• Abbreviated Dialing
... See page 90
• Alphabet Dialing
... See page 91
• Keypad Dialing
... See page 92