Sensor Test - Toshiba DP80F Operator's Manual

SENSOR TEST

The switch test checks if the de-
1
tection switches operate nor-
mally.
Press:
The test items in SWITCH TEST
mode are as follows:
• Detection of Top Cover
open/closed status
• Detection of Recording Pa-
per and Recording Paper
Tray presence/absence sta-
tus
NOTE:
If no operation is performed
within 10 seconds after an
operational instruction is dis-
played on the screen during
the switch test, the test result
will be judged to be NG.
236
2
Select the SWITCH Check the Top Cover
TEST Menu
Open the Top Cover. When its
open state is detected, the
screen below appears. After
checking that the screen is dis-
+
played, close the Top Cover.
Detects
+
of the Top Cover.
SENSOR TEST
CLOSE TOP COVER
+
+
SENSOR TEST
REMOVE PAPER
If no recording paper is placed
SENSOR TEST
in the Recording Paper Tray,
OPEN TOP COVER
the screen below is displayed.
You can resume the test by
loading the paper.
SWITCH TEST
PUT IN PAPER
3
Check the Paper Tray
Remove the Recording Paper in
the Recording
When the absence of a Paper is
detected, the screen below ap-
pears. After checking that the
screen is displayed, install the
Recording Paper in the Paper
the open state
Tray.
Detects the absence of
the Recording Paper.
SENSOR TEST
Close the cover
PUT IN PAPER
Install the Recording
Paper
SENSOR TEST
OK
If an Optional Recording Paper
Paper Tray. Tray is installed, follow the
same test procedure for the Op-
tional Recording Paper Tray.
SENSOR TEST
REMOVE PAPER TRAY 2
Detects the absence of
the Recording Paper
SENSOR TEST
PUT IN PAPER TRAY 2
Install the Recording Paper
The result of the switch test
("OK" or "NG") is displayed on
the screen, and the unit returns
to the individual test selection
screen.