Dial Number Preview; Correcting The Displayed Digits - NEC DS2000 Feature Handbook

Avoid dialing errors by
previewing your call
before you dial it.
To dial using Dial Number Preview:
1. Do not lift the handset, press
2. Dial
3. Dial the number you want to call.
4. Press a line key to have the system dial your call.

Correcting the Displayed Digits

If you make a mistake entering digits while using Dial Number
Preview, you can correct your entry before the systems dials the call.
To correct the displayed digits before dialing them out:
1. Use
you want to change.
2. Dial the digit that you want to have replace the cursor.
3. Press
digits you want to edit.
Press
of the cursor.

Dial Number Preview

.
If you make a dialing mistake, refer to Correcting
the Displayed Digits below.
or
or
OR
until the entire number displays to the left
The system will only dial the digits to the left of the
cursor.
With Dial Number Preview, you
can dial and review a number
before the system dials it out.
or press
until the cursor replaces the digit
to place the cursor over any other
.
51