Expanding/Replacing The Main Memory - Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual

Expanding/replacing the main memory

The following table shows the prescribed equipping order:
module pair 1A/1B
(black)
equipped
equipped
equipped
5.2 Expanding/replacing the main memory
Ê Open the server, remove the system fan 1, the system fan 2 and the traverse
as described in the
1
Figure 10: Removing a memory module
Ê Fold the assembly brackets outwards on both sides of the corresponding slot
(1).
Ê If the slot was equipped: pull the memory module out of the slot (2).
28
module pair 2A/2B
(blue)
empty
equipped
equipped
chapter "Preparation" on page 21
2
Options Guide
Main memory
module pair 3A/3B
(blue)
empty
empty
equipped
et seq..
1
TX200 S4