Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 36

Replacing the processor
Figure 18: Inserting a new processor
Ê Position the new processor over the socket and thenplace it carefully into the
socket (1).
V
CAUTION!
The processor can only be installed in one particular direction. Note
the marking on one of the corners (a). To avoid damaging the
processor, do not force it into the socket.
Figure 19: Fastening the new processor
Ê Close the cover (1).
Ê Push down the socket lever slowly (2) until it hooks in place (3).
Ê Apply a small amount of thermal paste to the upper side of the new
processor.
36
1
1
2
Options Guide
a
3
Processors
TX200 S4