Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 79

Conversion to hot-plug PS and redundant system fans
Figure 66: Installing the PS safe guard
Ê Install the PS safe guard and fasten it with one screw.
Ê Push the both power supply modules in the bays of PS cage until they
engage (description see the operating manual).
Ê Install the traverse, the system fan 2 and the system fan 1 as described in
the section "System fans and traverse" on page 85
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
TX200 S4
et seq..
Options Guide
et seq..
79