Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 32

Installing a second processor
Installing the processor and the heat sink
1
Figure 12: Releasing the lever
Ê Release the socket lever by pressing it sideways and pull it upward as far as
it will go (1).
Ê Open the cover (2).
Figure 13: Inserting the second processor
Ê Position the second processor over the socket and then carefully press it into
the socket (1).
V
CAUTION!
The processor can only be installed in one particular direction. Note
the marking on one of the corners (a). To avoid damaging the
processor, do not force it into the socket.
32
1
Options Guide
Processors
2
a
TX200 S4