Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 63

Expansion cards and BBU
Figure 49: Position screws
Ê Fasten the BBU with three screws at the outer side (the first BBU in the front
range, a second BBU in the middle range).
Ê Install the traverse, the system fan 2 and the system fan 1 as described in
the section "System fans and traverse" on page 85
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
TX200 S4
BBU 2
et seq..
Options Guide
Installing a BBU
BBU 1
et seq..
63