Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 83

Conversion from a floorstand model to a rack model
Figure 69: Position of the recesses
Ê Press the three hooks of the plastic front cover on the bottom side in the
recesses (see the circles) of the housing.
Ê Press the plastic front cover onto the housing until the three tabs on the top
side (see the circles) engage.
Figure 70: Installed plastic front cover
Ê Open the server as described in the
seq..
TX200 S4
chapter "Completion" on page 85
Options Guide
et
83