Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 29

Main memory
2
Figure 11: Installing a memory module
Ê Fold the assembly brackets outwards on both sides of the corresponding
slot.
Ê Carefully press the memory module into the slot (1) until the fastening tabs
on both sides of it engage (2).
Ê Reinsert the traverse, the system fan 1 and system fan 2 as described in the
chapter "Completion" on page 85
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
TX200 S4
Expanding/replacing the main memory
1
et seq..
et seq..
Options Guide
2
29