Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 34

Installing a second processor
Figure 16: Installing the heat sink
Ê Place the heat sink on the processor socket.
Ê Fasten the heat sink by tightening the four screws in a crossover pattern.
V
CAUTION!
Never install a processor without a heat sink and CPU fan as otherwise
the processor may overheat, causing the processor and system board to
fail.
Ê Reinsert the traverse, the system fan 1 and system fan 2 as described in the
chapter "Completion" on page 85
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
34
et seq..
et seq..
Options Guide
Processors
TX200 S4