Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 10

Expansions and conversions Preface
Additional expansion cards in the PCI slots
The system board offers seven PCI slots:
TM
– 2 x PCI-X slots(64 bit / 133 MHz IOOP )
– 4 x PCI-Express slots, Gen1, mechanical PCIe x8
– 1 x PCI-Steckplatz (32 Bit / 33 MHz)
Performance Adapter SNR: S26361-D2504
The Performance Adapter combines two PCIe x4 slots to one PCIe x8 slot. If
the adapter has been installed in slot 2 (or 7), slot 1 (or 6) can be operated as
PCIe x8.
SATA Software RAID
The SATA SW RAID 5 functionality will be activated by installing a license key
(RAID key).
Parallel interface for printers
As an option, a parallel interface can be provided for printers.
Conversion standard power supply to hot-plug power supply and
standard system fans to redundant system fans
The standard power supply can be replaced by a hot-plug power supply. The
hot-plug power supply consists of two power supply modules.
If one power supply module fails, the other power supply module guarantees the
unrestricted operation and the defective power supply module can be replaced
be replaced while the system is operating (hot-plug).
The standard system fans can be upgraded to redundant system fans. If the
redundant system fans are installed, the fans are operating in a redundant
configuration. A defective system fan can be replaced during the next service.
Conversion from a floorstand model to a rack model
The floorstand model can be optionally converted to allow the server to be
installed into any typical rack systems.
10 Options Guide
TX200 S4