Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 53

Accessible drives and LSP
Figure 40: Example connecting the SATA cable
Ê Connect the SATA cable to the hard disks extension box and the second port
of a controller (see the cabling plans in the Appendix).
I
It is possible to install a slimline drive in the hard disks extension box. The
procedure is the same as for installing the slimline drive in the multibay.
I
It is possible to install a LSP in the hard disks extension box. In this case
you can push the LSP in the top bay of the hard disks extension box
without using a frame.
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
TX200 S4
Installing a hard disks extension box
et seq..
Options Guide 53