Installing The Performance Adapter - Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual

Installing the Performance Adapter

8.3 Installing the Performance Adapter
Ê Open the server as described in the
seq..
Ê Remove the system fan 1 and the system fan 2 as described in the
"System fans and traverse" on page 24
Figure 50: Performance Adapter in slot 7
Ê Insert the Performance Adapter in slot 2 or slot 7.
Ê Install the system fan 2 and the system fan 1 as described in the
"System fans and traverse" on page 85
Ê Close the server, connect it to the power outlet, and switch it on as described
in the chapter "Completion" on page 85
64
chapter "Preparation" on page 21
et seq..
et seq..
et seq..
Options Guide
Expansion cards and BBU
section
et
section
TX200 S4