Fujitsu Siemens Computers PRIMERGY TX200 S4 Options Manual page 23

Preparation
Figure 4: Loosening the screws in the rack cabinet
Ê Loosen the screws (1+2) on the left and the right side at the rear side.
V
CAUTION!
At least two people are needed to lift the server out of the rack cabinet.
Ê Loosen the two knurled screws at the front side (see the
and pull the server carefully out of the rack.
V
CAUTION!
If you pull out the server too far, the server will fall down.
Ê Lift the server out of the rails and place it on a table, for example.
Ê Open the latch (see also the
Ê Remove the top cover.
TX200 S4
1
2
figure 2 on page
Options Guide
Rack model
figure 3 on page
21).
22)
23