Camera Led; Camera Timing - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

Spyder 3 GigE User's Manual

2.5 Camera LED

The camera is equipped with a red/green LED used to display the operational status of
the camera. The table below summarizes the operating states of the camera and the
corresponding LED states.
When more than one condition is active, the LED indicates the condition with the highest
priority. Error and warning states are accompanied by corresponding messages further
describing the current camera status.
Table 6: Diagnostic LED
Priority
1
2
3

2.6 Camera Timing

Table 7: Camera Link Timing Parameter Table
tLine_Period
twSync
twSYNC_INT
DALSA
Color of Status LED
Flashing Red
Flashing Green
Solid Green
Units Min.
μs 27.78
14.71
54.1
27.78
ns 100
ns 100
(3000*)
Meaning
Fatal Error. For example, camera temperature is too
high and camera thermal shutdown has occurred.
Camera initialization or executing a long command
(e.g., flat field correction commands ccp or ccf)
Camera is operational and functioning correctly
Typ. Max.
1000
1000
1000
1000
29
Notes
1K 1 Tap
1K 2 Tap
2K 1 Tap
2K 2 Tap
For exposure mode
4 this value needs to
be >3000ns other
wise >100ns
03-032-10158-09