Dalsa Spyder3 GigE Quick Start Manual

Hide thumbs Also See for Spyder3 GigE:

Download this manual See also: User Manual

Enlarged version

For additional information about the DALSA QuickCam application or for Product Support,

Address

605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9

Voice

Worldwide (519) 886-6000

Europe +49.8142.46770

Asia Pacific +813.5960.6353

Fax

(519) 886-2230

E-mail

Product Support (support@dalsa.com)

Worldwide Sales (sales.americas@dalsa.com)

European Sales (sales.europe@dalsa.com)

Asia Pacific Sales (sales.asia@dalsa.com)

Spyder3 GigE Quick Start Guide

03-32-10182-03

Page 1 For additional information about the DALSA QuickCam application or for Product Support, contact us at: Address 605 McMurray Road, Waterloo, Ontario, Canada N2V 2E9 Voice Worldwide (519) 886-6000 Europe +49.8142.46770 Asia Pacific +813.5960.6353 (519) 886-2230 E-mail Product Support (support@dalsa.com) Worldwide Sales (sales.americas@dalsa.com) European Sales (sales.europe@dalsa.com)
Page 2 Where to Find More Information Welcome to the Spyder3 GigE camera and DALSA QuickCam Quick Start Guide. With the QuickCam application, you can begin imaging with your • To view the QuickCam documentation, including a user’s manual, a driver Spyder3 GigE camera quickly and easily.
Page 3 Open the Driver Installation Tool On the Windows task bar click Start , point to connect the GPIO. Programs—DALSA QuickCam— Tools — Launch Driver Installation Tool . 2. If you are using an Intel PRO/1000 adapter a) On the...
Page 4 Spyder3 GigE Quick Set-Up Instructions Open QuickCam. On the Windows task bar click Start , point Programs—DALSA Install Ethernet card. QuickCam—DALSA QuickCam Following the manufacturer’s instructions, install an Ethernet card. For Gigabit performance, you must install an Intel PRO/1000 Ethernet card.