A1 Sensor Output Format; A1.1 Sensitivity Mode; A1.2 Ccd Shift Direction - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

Spyder 3 GigE User's Manual

A1 Sensor Output Format

A1.1 Sensitivity Mode

Purpose:
Syntax:
Syntax Elements:
Notes:
Example:

A1.2 CCD Shift Direction

Purpose:
Syntax:
Syntax Elements:
Notes:
Related Commands:
Example:
DALSA
Sets the camera's sensitivity mode. When using high sensitivity
mode, the camera's responsivity increases. High sensitivity mode
permits much greater scanning speeds in low light, or allows
reduced lighting levels.
ssm i
i
Sensitivity mode to use.
0 = Low sensitivity mode
1 = High sensitivity mode
2 = Tall pixel mode
•
To obtain the current sensitivity mode, use the command
or g et ssm .
g cp
1 4 H 1 5 H
•
The scd (set ccd direction) command is not available in low
sensitivity mode or tall pixel mode.
ssm 0
When in high sensitivity mode, selects the forward or reverse
CCD shift direction or external direction control. This
accommodates object direction change on a web and allows you
to mount the camera "upside down".
scd i
i
Shift direction. Allowable values are:
0 = Forward CCD shift direction.
1 = Reverse CCD shift direction.
2 = Externally controlled direction control via Camera Link
control CC3 (CC3=1 forward, CC3=0 reverse).
•
To obtain the current value of the exposure mode, use the
command or
g cp g et scd.
1 6 H 1 7 H
•
Available in high sensitivity mode only.
•
Refer to F igure 6: Object Movement and Camera Direction
2 8 3 H
Example using an Inverting Lens for an illustration of when
you should use forward or reverse shift direction.
s sm
1 8 H
scd 0
57
03-032-10158-09