Dalsa Piranha 3 Series User Manual
  1. Manuals
  2. Brands
  3. Dalsa Manuals
  4. Security Camera
  5. Piranha 3 Series
  6. User manual

Dalsa Piranha 3 Series User Manual

8k to 12k line scan ccd cameras
Hide thumbs
Table of Contents

Advertisement

Quick Links

All manuals and user guides at all-guides.com
Piranha 3
Camera User's Manual
P3-80-12k40-00-R
P3-80-08k40-00-R
P3-87-12k40-00-R
P3-87-08k40-00-R
7-Jun-11
03-032-10216-06
www.teledynedalsa.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Piranha 3 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dalsa Piranha 3 Series

Summary of Contents for Dalsa Piranha 3 Series

  • Page 1 All manuals and user guides at all-guides.com Piranha 3 Camera User’s Manual P3-80-12k40-00-R P3-80-08k40-00-R P3-87-12k40-00-R P3-87-08k40-00-R 7-Jun-11 03-032-10216-06 www.teledynedalsa.com...

  • Page 2: Piranha 3 User Manual

    © 2011 Teled yne DALSA. All inform ation provid ed in this m anu al is believed to be accu rate and reliable. N o resp onsibility is assu m ed by Teled yne DALSA for its u se. Teled yne DALSA reserves the right to m ake changes to this inform ation w ithou t notice.

  • Page 3: Table Of Contents

    3.3 Camera Output Format ..............................31 3.4 Data Processing ................................33 Processing Chain Overview and Description ....................33 Calibrating the Camera to Remove Non-Uniformity (Flat Field Correction) ..........35 Analog Signal Processing: Setting Analog Gain and Offset ................38 Teledyne DALSA 03-032-10216-06...
  • Page 4 Dark Patches ..............................69 Camera Link™ Reference, Timing, and Configuration Table _________________________ 71 LVDS Technical Description ..........................71 Camera Signal Requirements ......................... 71 Video Data ..............................72 Camera Control Signals ..........................72 Communication ............................... 72 Power ................................73 03-032-10216-06 Teledyne DALSA...
  • Page 5 All manuals and user guides at all-guides.com Piranha 3 User Manual Error Handling and Command List ___________________________________________ 75 B1 Error Handling ................................75 B2 All Available Commands .............................. 76 EMC Declaration of Conformity _____________________________________________ 85 Revision History ________________________________________________________ 87 Index _______________________________________________________________ 89 Teledyne DALSA 03-032-10216-06...
  • Page 6 All manuals and user guides at all-guides.com Piranha 3 User Manual 03-032-10216-06 Teledyne DALSA...

  • Page 7: Introduction To The Piranha 3 Camera

    Broad band Responsivity DN/ nJ/ cm Rand om Noise rms 12.5 10.5 Dynamic Range (8 bit) ratio 328:1 391:1 FPN Corrected PRNU Corrected N ote: All nu m bers referenced to 12 bits u nless otherw ise specified . Teledyne DALSA 03-032-10216-06...

  • Page 8: Programmability

    Smaller, square bod y, 12k resolution, 8 taps, 40MHz d ata rate, Med ium or Full Camera Link configuration . P3-87-08k40-00-R Smaller, square bod y, 8k resolution, 8 taps, 40MHz d ata rate, Med ium or Full Camera Link configuration . 03-032-10216-06 Teledyne DALSA...

  • Page 9: Camera Performance Specifications

    (measured at front plate) Data Output Format Bits 8 or 12 bit user selectable 12 bits available in 4 tap operation only. Output Data Configuration Med ium or Full Camera Link user selectable Specification Units Notes Minimum Line Rate Teledyne DALSA 03-032-10216-06...

  • Page 10: Maximum Line Rate Khz

    Unit -10 dB 0 dB +10 dB Broad band DN/ nJ/ cm 43.6 Responsivity Rand om Noise 10.5 Dynamic Range ratio 1000 1242 (12 bit) DC Offset FPN ECD FPN ECE FPN Corrected PRNU ECD PRNU ECE 03-032-10216-06 Teledyne DALSA...
  • Page 11 6. The FPN / PRN U calibration cond itions (gain, ECE, ECD, line rated , light) are set before calibration. The resid u al error is confirm ed to be less than the m axim u m specified . Teledyne DALSA 03-032-10216-06...

  • Page 12: Image Sensor

    12287-9217 (od d pixels) 12288-9217 (even pixels) Table 4: 08k40 Pixel Readout Tap # First Pixel 1-2047 (od d pixels) 2-2048 (even pixels) 2049-4095 (od d pixels) 2050-4096 (even pixels) 6143-4097 (od d pixels) 6144-4098 (even pixels) 03-032-10216-06 Teledyne DALSA...

  • Page 13: Responsivity

    All manuals and user guides at all-guides.com Piranha 3 User Manual 8191-6141 (od d pixels) 8192-6142 (even pixels) 1.4 Responsivity Figure 2: Responsivity Graphs Teledyne DALSA 03-032-10216-06...
  • Page 14 All manuals and user guides at all-guides.com Piranha 3 User Manual 03-032-10216-06 Teledyne DALSA...

  • Page 15: Camera Hardware Interface

    6-pin H irose connector for pow er. Refer to section 2.2.2 Pow er Connector for d etails. • H igh-d ensity 26-pin MDR26 connector for Cam era Link control signals, d ata signals, and serial com m u nications. Refer to section Teledyne DALSA 03-032-10216-06...

  • Page 16: Led Status Indicator

    Solid Green Camera is operational and functioning correctly Flashing Red Fatal Error. Camera temperature is too high and camera thermal shutd ow n has occurred . Solid Red Warning. Loss of functionality (e.g. external SRAM failure) 03-032-10216-06 Teledyne DALSA...

  • Page 17: Power Connector

    Many high qu ality su pplies are available from other vend ors. Teled yne DALSA assu m es no responsibility for the u se of these su pplies.

  • Page 18: Camera Link Configuration

    Camera Connector Right Angle Channel Link Signal Cable Name Frame Grabber inner shield Inner Shield inner shield Inner Shield PAIR1- PAIR1+ PAIR2- PAIR2+ PAIR3- PAIR3+ Yclk- PAIR4- Yclk+ PAIR4+ PAIR5- PAIR5+ 100 ohm PAIR6+ terminated PAIR6- PAIR7- PAIR7+ 03-032-10216-06 Teledyne DALSA...

  • Page 19: Input Signals, Camera Link

    Cam era Link operating m od e. Refer to section 3.3.1 Setting the Cam era Link Mod e for d etails on setting the Cam era Link configu ration. • For a Cam era Link reference refer to Append ix A on page 71. Teledyne DALSA 03-032-10216-06...

  • Page 20: Camera Link Video Timing

    The minimum w id th of the high pulse w hen the ―SMART EXSYNC‖ feature is turned off Is the integration time w hen the ―SMART EXSYNC‖ tw SYNC_INT (SMART) feature is available and turned on. Note that the 3,000 minimum time is necessary to guarantee proper operation. 03-032-10216-06 Teledyne DALSA...
  • Page 21 +/ - values. The user should command times greater than these to ensure proper charge transfer from the photosites. Failure to meet this requirement may result in blooming in the Horizontal Shift Register. Teledyne DALSA 03-032-10216-06...
  • Page 22 All manuals and user guides at all-guides.com Piranha 3 User Manual 03-032-10216-06 Teledyne DALSA...

  • Page 23: Software Interface: How To Control The Camera

     A space or m u ltiple space characters separate param eters. Tabs or com m as are invalid param eter separators.  Upper and low ercase characters are accepted  The backspace key is su pported Teledyne DALSA 03-032-10216-06...

  • Page 24: Setting Baud Rate

    Som e com m and s m ay not be available in you r cu rrent operating m od e. The help screen d isplays N A in this case. 03-032-10216-06 Teledyne DALSA...
  • Page 25 0-16 set subtract background 0-8:0-4095 set sync frequency 300-23619 set system gain 0-8:0-65535 set upper threshold 0-4095 set video mode update gain reference verify temperature verify voltage write FPN coefficients write PRNU coefficients write user settings Teledyne DALSA 03-032-10216-06...

  • Page 26: Command Categories

    Calculate FPN ( Set Digital Offset ( Calculate PRNU ( Enable Pixel Coefficients ( Set PRNU Coefficient ( Set FPN Coefficient ( Set PRNU Range ( Set FPN Range ( Set Background Subtract ( Set Digital System Gain ( 03-032-10216-06 Teledyne DALSA...

  • Page 27: Sensor Output Format

    Internal Maximum exposure time. Exposure control d isabled (ECD) External Internal Smart EXSYNC. ECE. External External External sync, external pixel reset. ECE. External Internal Fixed integration time. ECE. Internal Internal Internal line rate, maximum exposure time. ECD. Teledyne DALSA 03-032-10216-06...

  • Page 28: Exposure Modes In Detail

    Example 2: Line Rate is set by External Trigger Pulses. Line Period Line Period Readout Readout Exposure Time Exposure Time EXSYNC Falling Edge Falling Edge Ignored During Ignored During Readout Readout 03-032-10216-06 Teledyne DALSA...
  • Page 29 Mode 6: External Line Rate and Internally Programmable Exposure Time Figure 10: EXSYNC controls Line Period with Internally controlled Exposure Time Line Period Line Period Readout Readout Programmable Period Programmable Period Using command Using Command EXSYNC CR=Charge Reset Teledyne DALSA 03-032-10216-06...

  • Page 30: Setting The Line Rate

    8k: 2500-33855 H z  Notes: To read the current line frequency, use the command ssf.  If you enter an invalid line rate frequency, an error message is returned . Related Command s: sem, ssf 10000 Example: 03-032-10216-06 Teledyne DALSA...

  • Page 31: Setting The Exposure Time

     Notes: To obtain the current d ata mod e, use the command clm.  The bit patterns are d efined by the Camera Link Road map and the Camera Link Stand ard . clm 15 Example: Teledyne DALSA 03-032-10216-06...
  • Page 32 The Piranha 3 currently only supports a throughput of 320. This may change in future cameras. sot m Syntax: Syntax Elements: Output throughput. Allow able value is: 320 = 4 taps at 80MHz or 8 taps at 40MHz 03-032-10216-06 Teledyne DALSA...

  • Page 33: Data Processing

    Processing Chain Overview and Description The follow ing d iagram show s a sim plified block d iagram of the cam era’s analog and d igital processing chain. The analog processing chain begins w ith an analog gain Teledyne DALSA 03-032-10216-06...

  • Page 34: Digital Processing

    You m ay w ant to set the valu e if you are not u sing FPN correction bu t w ant to perform PRN U correction. 03-032-10216-06 Teledyne DALSA...

  • Page 35: Calibrating The Camera To Remove Non-Uniformity (Flat Field Correction)

    (target) for flat, w hite ou tpu t. Vid eo ou tpu t is set slightly above the brightest pixel (d epend ing on offset su btracted ). Teledyne DALSA 03-032-10216-06...
  • Page 36  Correction resu lts are valid only for the cu rrent analog gain and offset valu es . If you change these valu es, it is recom m end ed that you recalcu late you r coefficients. 03-032-10216-06 Teledyne DALSA...
  • Page 37 ( ) or use the automated algorithm ccg i 0 i DALSA recommends a target value of about 80% of saturation. If you change the gain, FPN coefficients should be recalculated. 3. Issue the command . The camera will respond with OK>( if no error occurs).

  • Page 38: Analog Signal Processing: Setting Analog Gain And Offset

    Tap selection. Use 0 for all taps or 1 to 8 for ind ivid ual tap selection. Gain value in a range from –10 to +10d B in steps of .035 (typical).  Notes: To return the current analog gain setting, use the command sag. Example: sag 0 5.2 Related Command s: 03-032-10216-06 Teledyne DALSA...
  • Page 39 0 0, 0 0, 0 0, and send ing the command s: 0 4096 ccg 2 0 3040 Example: Related Command s: sag, Teledyne DALSA 03-032-10216-06...
  • Page 40 Average target value in a range from 0 to 255DN (12 bit LSB).  Notes: Perform analog offset calibration before performing FPN and PRNU coefficients.  To return the current analog offset values, use the command cao. cao 1 50 Example: Related Command s: 03-032-10216-06 Teledyne DALSA...
  • Page 41 2800. Gain values for all other taps are left unchanged. 4095 Region of Interest Tap 4(even) 2800 Video Tap 3(odd) Tap 1(odd) Tap 5(odd) Tap 7(odd) Tap 2(even) Tap 6(even) Tap 8(even) 4000 12288 9700 After analog gain calibration Before analog gain calibration Teledyne DALSA 03-032-10216-06...
  • Page 42 4095 Region of Interest 2800 Video Tap 1(odd) Tap 3(odd) Tap 5(odd) Tap 7(odd) Tap 2(even) Tap 4(even) Tap 6(even) Tap 8(even) 4000 12288 9700 After analog gain calibration Before analog gain calibration 03-032-10216-06 Teledyne DALSA...
  • Page 43 To update the analog gain reference: Purpose: Sets the current analog gain setting to be the 0d B point. This is useful after tap gain matching allow ing you to change the gain on all taps by the same amount. Syntax: Teledyne DALSA 03-032-10216-06...

  • Page 44: Piranha 3 User Manual

    Sets an ind ivid ual pixel’s FPN coefficient. Purpose: Syntax sfc x i Syntax Elements: The pixel number from 1 to sensor pixel count. Coefficient value in a range from 0 to 2048 (12 bit LSB). Example: sfc 10 50 03-032-10216-06 Teledyne DALSA...
  • Page 45  Refer to Calibrating the Cam era to Rem ove N on- Uniform ity (Flat Field Correction)on page 35 for a proced u ral overview on perform ing flat field correction. Related Command s: Teledyne DALSA 03-032-10216-06...
  • Page 46 ) to rem ove som e of the FPN .  N ote: Refer to Calibrating the Cam era to Rem ove N on- Uniform ity (Flat Field Correction)on page 35 for a proced u ral 03-032-10216-06 Teledyne DALSA...
  • Page 47 You should try to make your d arkest pixel in the scene equal to zero. ssb t i Syntax: Syntax Elements: Tap selection. Allow able range is 1 to 8, or 0 for all taps. Subtracted value in a range in DN from 0 to 4095. Teledyne DALSA 03-032-10216-06...
  • Page 48 Gain setting. The gain ranges are 0 to 65535. The d igital vid eo values are multiplied by this value w here: D igital G ain= 4096 Use this command in conjunction w ith the command . Related Command s: ssg 1 15 Example: 03-032-10216-06 Teledyne DALSA...

  • Page 49: Returning Calibration Results And Errors

    The first pixel number of the range. The last pixel number of the range. Coefficient value in a range from 0-2048.  Notes: The first pixel of the range must be less than the last. sfr 1 100 80 Example: Teledyne DALSA 03-032-10216-06...
  • Page 50 LVAL is not high d u ring the end -of-line statistics. els 1 Example: Table 13: End-of-Line Sequence Description Location Value Description A’s By ensuring these values consistently toggle betw een "aa" and "55", you can 5’s verify cabling (i.e. no stuck bits) 03-032-10216-06 Teledyne DALSA...

  • Page 51: Setting Thresholds

    Sets the low er threshold limit to report in the end -of-line sequence. slt i Syntax: Syntax Elements: Upper threshold limit in range from 0 to 4095.  Notes: LVAL is not high d u ring the end -of-line statistics.  Related Command s: Example: slt 1024 Teledyne DALSA 03-032-10216-06...

  • Page 52: Saving And Restoring Settings

    To restore saved pixel coefficients, u se the com m and Current Session Settings These are the cu rrent operating settings of you r cam era. To save these settings to non - volatile m em ory, u se the com m and 03-032-10216-06 Teledyne DALSA...
  • Page 53 2 = Coefficient set tw o 3 = Coefficient set three 4 = Coefficient set four lpc 0 Example: Resetting the Current Pixel Coefficients Purpose: Resets the current pixel coefficients to zero. This command d oes not reset saved coefficients. Syntax: Teledyne DALSA 03-032-10216-06...

  • Page 54: Diagnostics

    , to ensure the proper vid eo input range into the processing chain before executing any pixel calibration command s. gl x1 x2 Syntax: Syntax Elements: Pixel start number. Must be less than or equal to the pixel end 03-032-10216-06 Teledyne DALSA...

  • Page 55: Returning Averaged Lines Of Video

    FPN and PRNU coefficients are not includ ed in the d ata.  Values returned are in 12 bit DN. css, Related Command s: Example: gla 10 20 Teledyne DALSA 03-032-10216-06...
  • Page 56 Returns the frequency for the requested Camera Link control signal gsf i Syntax: Syntax Elements: Camera Link control signal to measure: 1: CC1 (EXSYNC) 2: CC2 (PRIN ) 3: CC3 (Spare) 4: CC4 (Spare) gsf 1 Example: 03-032-10216-06 Teledyne DALSA...

  • Page 57: Returning All Camera Settings With The Camera Parameter Screen

    3.2.1 Exposure Mod e, Line Rate and Exposure Time for d etails. Video Mode: video Current vid eo mod e value set w ith the command . See section 3.6.1 Generating a Test Pattern for d etails. Teledyne DALSA 03-032-10216-06...
  • Page 58 Sequence for d etails. Camera Link Mode: 21, Full, 8 taps, 8 Camera Link mod e set bits, no time MUX w ith the command . See section 3.3.1 Setting the Camera Link Mod e for d etails. 03-032-10216-06 Teledyne DALSA...
  • Page 59 . See section 3.4.2 Analog and Digital Signal Processing Chain for d etails. System Gain: Digital gain settings set w ith the command . See section 3.4.2 Analog and Digital Signal Processing Chain for d etails. Teledyne DALSA 03-032-10216-06...

  • Page 60: Returning Camera Settings With Get Commands

    Returns the average of the pixel range ind icated . get gsf Returns the frequency of the Camera Link control signal ind icated , either 1, 2, 3, or 4. get lpc Returns the current coefficient set number. 03-032-10216-06 Teledyne DALSA...
  • Page 61 Returns the current uppd er threshold value. get svm Returns the current vid eo mod e. 0: Normal vid eo mod e 1: Test pattern 2: Test pattern 3: Test pattern get ugr Returns the gain reference value Teledyne DALSA 03-032-10216-06...
  • Page 62 0 = No PRNU coefficients saved 1 = Pixel coefficients have been saved get wus Returns w hether user settings have been saved . 0 = No user settings saved 1 = User settings have been saved 03-032-10216-06 Teledyne DALSA...

  • Page 63: Optical And Mechanical Considerations

    All manuals and user guides at all-guides.com Piranha 3 User Manual Optical and Mechanical Considerations 4.1 Mechanical Interface Figure 18: P3-80 Mechanical Drawing Teledyne DALSA 03-032-10216-06...

  • Page 64: Lens Mounts

    Units: mm 6.0 (2x) top of CCD to datum A) 12.5 M3x0.5 55.0 x 6.0 deep (2x) Lens Mounts Model Number Lens Mount Options All mod els M72x0.75 Mount Back Focal Distance (sensor die to adapter) 6.56±0.25mm 03-032-10216-06 Teledyne DALSA...

  • Page 65: Optical Interface

    , exposu re tim es, light sou rce characteristics, environm ental and acqu isition system specifics, and m ore. Teled yne DALSA’s Web site, here, provid es an introd u ction to this potentially com plicated issu e. See ―Rad iom etry and Photo Responsivity‖...

  • Page 66: Magnification And Resolution

    45m m , and requ ires that 100m in the object space correspond to each pixel in the im age sensor. Using the preced ing equ ation, the object d istance m u st be 450m m (0.450m ).    0 450  03-032-10216-06 Teledyne DALSA...

  • Page 67: Troubleshooting

    To valid ate cable integrity, have the cam era send ou t a test pattern and verify it is being properly received . Refer to section 3.6.1 Generating a Test Pattern for fu rther inform ation on ru nning test patterns. Teledyne DALSA 03-032-10216-06...

  • Page 68: Troubleshooting Using The Serial Interface

    (e.g. EXSYN C, if cam era is u sing an internal signal for synchronization). Line Dropout, Bright Lines, or Incorrect Line rate Verify that the frequ ency of the internal sync is set correctly. 03-032-10216-06 Teledyne DALSA...

  • Page 69: Noisy Output

    If you have verified that you r exposu re tim e is consistent and patterns of low frequ ency intensity variations still occu r, ensu re that you are u sing a DC or high frequ ency light sou rce and that no am bient light is affecting you r system . Teledyne DALSA 03-032-10216-06...
  • Page 70 All manuals and user guides at all-guides.com Piranha 3 User Manual 03-032-10216-06 Teledyne DALSA...

  • Page 71: Camera Link™ Reference, Timing, And Configuration Table

    This section provid es d efinitions for the signals u sed in the Cam era Link interface. The stand ard Cam era Link cable provid es cam era control signals, serial com m u nication, and vid eo d ata. Teledyne DALSA 03-032-10216-06...

  • Page 72: Video Data

    The softw are API w ill provid e fu nctions to enu m erate board s and 03-032-10216-06 Teledyne DALSA...

  • Page 73: Power

    Pow er w ill not be provid ed on the Cam era Link connector. The cam era w ill receive pow er throu gh a sep arate cable. Cam era m anu factu rers w ill d efine their ow n pow er connector, cu rrent, and voltage requ irem ents. Teledyne DALSA 03-032-10216-06...
  • Page 74 All manuals and user guides at all-guides.com Piranha 3 User Manual 03-032-10216-06 Teledyne DALSA...

  • Page 75: Error Handling And Command List

    511 (8). coefficients have been clipped Message Description Output only in ―d iagnostic mod e‖ or self check at pow er or reset Error 01: Internal error xx> camera. Where xx is a cod e. Teledyne DALSA 03-032-10216-06...

  • Page 76: B2 All Available Commands

    Refer to Analog Signal Processing: y2 = vertical pixel end Setting Analog Gain and Offset for number d etails. correction calibrate fpn Start FPN coefficient calibration. Refer to section 3.4.2 Analog and Digital Signal Processing Chain for d etails. 03-032-10216-06 Teledyne DALSA...
  • Page 77 15: Med ium configuration, 4 taps, 8 bit output 16: Med ium configuration, 4 taps, 12 bit output 21: Full configuration, 8 taps, 8 bit output Refer to section 3.3.1 Setting the Camera Link Mod e for d etails. Teledyne DALSA 03-032-10216-06...
  • Page 78 Set number of line samples averaged for pixel coefficient calculations or for command . Values: 256, output of 512, 1024. Refer to Returning Averaged Lines of Vid eo on page 55 for d etails. 03-032-10216-06 Teledyne DALSA...
  • Page 79 = Pixel start number x2 = Pixel end number in a range from 1 to sensor pixel count. Refer to Returning a Single Line of Vid eo on page 54 for d etails. Teledyne DALSA 03-032-10216-06...
  • Page 80 Refer to section 3.4.1 Setting a Region of Interest (ROI:setting) for d etails. reset pixel coeffs Reset the pixel coefficients to 0. Refer to Resetting the Current Pixel Coefficients on page 53 for d etails. 03-032-10216-06 Teledyne DALSA...
  • Page 81 Factory setting. 8 = Internal SYNC, internal PRIN, programmable exposure time. Maximum line rate for exposure time. set exposure time Sets the exposure time. Refer to the camera help screen (h command ) for allow able range. Teledyne DALSA 03-032-10216-06...
  • Page 82 = Tap value. 0 for all taps or 1 to 8 for ind ivid ual tap selection. i = Subtracted value in a range from 0 to 4095. Refer to on page 44 for d etails. 03-032-10216-06 Teledyne DALSA...
  • Page 83 1 = PRNU coefficient set one 2 = PRNU coefficient set tw o 3 = PRNU coefficient set three 4 = PRNU coefficient set four Refer to section 3.5.1 Saving and Restoring PRNU and FPN Coefficients for d etails. Teledyne DALSA 03-032-10216-06...

  • Page 84: Command Syntax

    All manuals and user guides at all-guides.com Piranha 3 User Manual Command Syntax Parameters Description w rite user settings Write all of the user settings to EEROM. Refer to section 3.5 Saving and Restoring Settings for d etails. 03-032-10216-06 Teledyne DALSA...

  • Page 85: Emc Declaration Of Conformity

    73/ 23/ EEC and the EMC Directive 89/ 336/ EEC and carries the CE m ark accord ingly. Place of Issu e Waterloo, ON , CAN ADA Date of Issu e April 2005 N am e and Signatu re Hank Helmond of au thorized person Quality Manager, Teledyne D ALSA Corp. Teledyne DALSA 03-032-10216-06...
  • Page 86 All manuals and user guides at all-guides.com Piranha 3 User Manual This Declaration correspond s to EN 45 014. 03-032-10216-06 Teledyne DALSA...

  • Page 87: Revision History

    Camera mechanicals revised so that the sensor alignment is d one based on the tooling holes in the camera's front plate. Mechanical illustration in the manuals and d atasheets revised to show the new alignment. Teled yne DALSA log o and information also ad d ed .
  • Page 88 All manuals and user guides at all-guides.com Piranha 3 User Manual 03-032-10216-06 Teledyne DALSA...

  • Page 89: Index

    50 errors, 49 resetting, 50 overview , 35 command performing, 37 format, 23 restrictions, 36 list, 76 results, 49 parameters, 24 FPN, 35 command s coefficient, 44 categories, 26 correction, 44 connectors, 15–19 FVAL, 72 Teledyne DALSA 03-032-10216-06...
  • Page 90 9 setting, 33 setting, 30 PRNU, 35 line rate, 27 coefficient, 47 line statistics, 54 correction, 45, 46 LVAL, 72 processing chain, 33 LVDS, 71 pairs, 72 read out, 12 rebooting, 54 magnification, 66 resolution, 9 03-032-10216-06 Teledyne DALSA...
  • Page 91 68 specifications electrical, 9 key, 7 mechanical, 9 vid eo d ata, 55, 72 optical, 9 voltage performance, 9 measurement, 56 sensor, 9 statistics, 54 status camera LED, 16 w arning messages, 75 subtracting background , 47 Teledyne DALSA 03-032-10216-06...

This manual is also suitable for:

Piranha 3 p3-87-08k40-00-rPiranha 3 p3-80-12k40-00-rPiranha 3 p3-87-12k40-00-rPiranha 3 p3-80-08k40-00-r

Table of Contents