Ethernet Connector - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

Spyder 3 GigE User's Manual
Figure 8: Spyder 3 GigE Input and Output Connectors
!
WARNING: It is extremely important that you apply the appropriate voltages to your camera.
Incorrect voltages may damage the camera. See section 2.4 for more details.

2.4.1 Ethernet Connector

Ethernet Connection
LED@ 1Gbps (Green)
Ethernet Connection LED
Steady green indicated that an Ethernet connection is successfully established at 1Gbps.
Data Transmission LED
Steady yellow indicates that the camera is ready for data transmission.
Flashing yellow indicates that the camera is transmitting or receiving data.
EMC Compliance
In order to achieve EMC compliance, the Spyder 3 camera requires the use of shielded
CAT5e or CAT6 Ethernet cables.
DALSA
Data Transmission LED
(Yellow)
25
03-032-10158-09