Sensor Shift Direction - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

12

Sensor Shift Direction

When in high sensitivity mode, you can select either forward or reverse CCD shift
direction. This accommodates object direction change on a web and allows you to mount
the camera "upside down".
Figure 6: Object Movement and Camera Direction Example using an Inverting Lens
Direction of
Object Movement
Camera should operate in
Reverse Shift Direction
Note: You can control the CCD shift direction through the serial interface. Use the
software command scd to determine whether the direction control is set via software
control or via the Camera Link control signal on CC3. Refer to the CCD Shift Direction
section of this manual, page 57, for details.
03-032-10158-09
scd 1
Camera should operate in
Forward Shift Direction
scd 0
Spyder 3 GigE User Manual
Direction of
Object Movement
DALSA