A4.5 Camera Frequency Measurement; A4.6 Returning The Led Status - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

Spyder 3 GigE User's Manual

A4.5 Camera Frequency Measurement

Purpose:
Syntax:
Syntax Elements:
Note:
Example:

A4.6 Returning the LED Status

Purpose:
Syntax:
Notes:
DALSA
Returns the frequency for the requested Camera Link control
signal
gsf i
i
Camera Link control signal to measure:
1 : CC1 (EXSYNC)
2 : CC2 (PRIN)
3 : CC3 (CCD Direction)
4 : CC4 (Spare)
•
Camera operation may be impacted when entering the gsf
command (i.e., poor time response to direction change or
video may have artifacts (gain changes) for several lines
while the camera returns signal information)
•
This command is not available when operating the camera
with external CCD direction control (scd 2)
gsf 1
Returns the status of the camera's LED.
gsl
The camera returns one of the following values:
1 = red (loss of functionality)
2 = green (camera is operating correctly)
5 = flashing green (camera is performing a function)
6 = flashing red (fatal error)
•
Refer to section 2 .5 Camera LED for more information on
2 9 5 H
the camera LED
89
03-032-10158-09