A1.5 Configuring The Gpio Connector - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

64

A1.5 Configuring the GPIO Connector

Overview
The following commands provide a connection between the GPIO controller and the
Spyder 3 GigE camera's internal functions.
Setting the GPIO Output Signal
Purpose:
Syntax:
Syntax Elements:
Notes:
Related Commands:
Example:
03-032-10158-09
sgd p i
p
i
,
sgd 0 0
Sets the signal type for the selected output.
sgo i i
i
Output to set.
0 = Output 0, pin 11 (TTL) or 11 and 12 (LVDS)
1 = Output 1, pin 13 (TTL) or 13 and 14 (LVDS)
2 = Output 2, pin 15 (TTL) or 15 and 10 (LVDS)
3 = Output 3, pin 9 (TTL)
i
Signal type.
0 = High impedance (high z)
1 = TTL
2 = LVDS
•
To read the current configuration, use the command
sgo i where i is the output signal.
•
If you enter an invalid configuration, an error message is returned.
s gi
3 8 H
sgo 0 1
Spyder 3 GigE User Manual
d gc or
g et
3 6 H 3 7 H
DALSA