Table of Contents
Advertisement
Spyder 3 GigE User's Manual
2.1 Installation Overview
DALSA
1
Install Ethernet card.
Following the manufacturer's instructions,
install an Ethernet card. For Gigabit
performance, you must install an Intel
PRO/1000 Ethernet
card.
Do not install the manufacturer's
!
driver.
You will install the appropriate
QuickCam driver in step 3.
2
Install QuickCam GUI.
Insert the
Spyder3 GigE CD
into your CD-
ROM and follow the online instructions to
install the QuickCam GUI.
3
Install QuickCam driver.
1.
Open
the Driver Installation Tool
Programs—DALSA QuickCam—
2. If you are using an
Intel PRO/1000 adapter
a) On the
Pro 1000 Adapters
interface card adapter with no installed driver (i.e. when the Device Class is
Ethernet Controller).
The following context menu appears:
b) Choose
Install High Performance IP Device Driver
High Performance IP Device Driver.
If you are
NOT
using an
Intel PRO/1000 adapter
a) On the
Universal IP Filter Driver
installs the QuickCam Universal IP Filter Driver on ALL network adapters
installed on the system that are using a network driver. This excludes
PRO/1000 adapters on which the QuickCam High-Performance Driver has
been installed.
.
On the Windows task bar click
Tools
—
Launch Driver Installation Tool
:
tab, right-click on an Intel PRO/1000 network
to install the QuickCam
:
tab, click,
Install Filter Driver...
19
Start
, point to
.
This button
03-032-10158-09
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
