Cleaning The Sensor Window - Dalsa Spyder 3 GigE SG-10-01k80-00-R User Manual

46

5.3 Cleaning the Sensor Window

1. Use compressed air to blow off loose particles. This step alone is usually sufficient to
2. If further cleaning is required, use a lens wiper moistened with alcohol or acetone.
3. We recommend using lint-free ESD-safe cloth wipers that do not contain particles that
4. An alternative to ESD-safe cloth wipers is Transplex swabs that have desirable ESD
5. Wipe the window carefully and slowly.
6. When cleaning long linear sensors, it may be easier to wipe along the width (i.e. as
03-032-10158-09
clean the sensor window.
can scratch the window. The Anticon Gold 9"x 9" wiper made by Milliken is both ESD
safe and suitable for class 100 environments. Another ESD acceptable wiper is the
TX4025 from Texwipe.
properties. There are several varieties available from Texwipe. Do not use regular
cotton swabs, since these can introduce charge to the window surface.
opposed to the length) of the sensor.
Spyder 3 GigE User Manual
DALSA