Yealink SIP-T2 Series Provisioning Manual page 99

Permitted
Parameter
Values
network.802_1 URL within
x.client_cert_u 511
rl = characters
network.vpn_
0 or 1
enable =
URL within
openvpn.url = 511
characters
network.lldp.e
0 or 1
nable =
network.lldp.p
Integer from
acket_interval
1 to 3600
=
network.span_
0 or 1
to_pc_port =
Descriptions
The default value is blank.
It takes effect after a reboot.
It configures the access URL of the
device certificate when the 802.1x
mode is configured as EAP-TLS.
The default value is blank.
It takes effect after a reboot.
It enables or disables OpenVPN
feature.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.
It configures the access URL of the *.tar
file for OpenVPN.
The default value is blank.
It enables or disables LLDP feature.
0-Disabled
1-Enabled
The default value is 1.
It takes effect after a reboot.
It configures the interval (in seconds)
for the phone to broadcast the LLDP
request.
The default value is 60.
It takes effect after a reboot.
It enables or disables the phone to
span data packets received in the
WAN port to the PC port. If it is
enabled, all packets from WAN port
can be received by PC port.
0-Disabled
1-Enabled
The default value is 0.
It takes effect after a reboot.
Appendix
Web Setting Path
Network->
Advanced->802.1x
->Device
Certificates
Network->
Advanced->VPN
->Active
Network->
Advanced->VPN-
>Upload VPN
Config
Network->
Advanced->LLDP-
>Active
Network->
Advanced->LLDP-
>Packet Interval
(1~3600s)
Network->
Advanced->Span
to PC->Span to PC
Port
89