Yealink SIP-T2 Series Provisioning Manual page 156

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
om.barge =
String within
features.hotlin
e_number =
characters
features.hotlin Integer from
e_delay =
features.dtmf.
hide =
features.dtmf.
hide_delay =
(not
applicable to
SIP-T20P IP
phones)
features.dtmf.r
epetition =
features.dtmf.r
eplace_tran =
146
Values
barge in an intercom call.
0-Disabled
1-Enabled
The default value is 0.
It configures the hotline number.
32
The default value is blank.
It configures the delay time (in
seconds) for the phone to dial out the
hotline number automatically.
0 to 10
The default value of delay time is 4.
It enables or disables the phone to
suppress the display of DTMF digits.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It enables or disables the phone to
display the DTMF digits for a short
period before displaying as asterisks
when the parameter
"features.dtmf.hide" is set to 1
0 or 1
(Enabled).
0-Disabled
1-Enabled
The default value is 0.
It configures the repetition times for
sending the DTMF packets.
1, 2 or 3
The default value is 3.
It enables or disables the phone to
send DTMF sequences for transfer
function when pressing the transfer
soft key or the TRAN key.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
Descriptions Web Setting Path
Barge
Features->General
Information->
Hotline Number
Features->General
Information->
Hotline Delay
(0~10s)
Features->General
Information->Supp
ress DTMF Display
Features->General
Information->Supp
ress DTMF Display
Delay
Features->General
Information->DTM
F Repetition
Features->General
Information->DTM
F Replace Tran