Yealink SIP-T2 Series Provisioning Manual page 45
Auto provisioning guide
Hide thumbs
Also See for SIP-T2 Series:
- Administrator's manual (1108 pages) ,
- Auto provisioning manual (241 pages) ,
- Provisioning manual (148 pages)
Table of Contents
Advertisement
4.
Enter the desired value in the DHCP Option Value field.
The default value is yealink.
5.
Configure the desired update mode.
For more information, refer to
6.
Click Confirm to accept the change.
Yealink IP phones support obtaining the provisioning server address from the phone
flash. To obtain the provisioning server address by reading the phone flash, make sure
the configuration is set properly.
To configure the Phone Flash via web user interface:
1.
Click on Settings->Auto Provision.
Obtaining the Address of Provisioning Server
Update Mode
on page 37.
35
Advertisement
Table of Contents
