Yealink SIP-T2 Series Provisioning Manual page 102

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
auto_provision
.custom.uploa
d_method =
auto_provision
.power_on =
auto_provision
.pnp_enable
=
auto_provision
.weekly.enabl
e =
0,1,2,3,4,5,6
auto_provision
.weekly.dayof combination
week =
92
Values
It configures the way the phone
uploads the MAC-local.cfg file to
provisioning server when the
parameter
"auto_provision.custom.sync" is set to
0 or 1
1 (Enabled).
0-Put
1-Post
The default value is 0.
It enables or disables the phone to
perform an auto provisioning process
when powered on.
0-Disabled
0 or 1 1-Enabled
The default value is 1.
Note: The old parameter
"auto_provision.mode" is also
applicable to IP phones.
It enables or disables Plug and Play
feature. If it is enabled, the phone will
broadcast PnP SUBSCRIBE messages
to obtain a provisioning server
0 or 1
address after startup.
0-Disabled
1-Enabled
The default value is 1.
It enables or disables the phone to
check new configuration weekly.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It configures the days of the week for
the phone to check new configuration
or a
weekly.
of these 0-Sunday
digits 1-Monday
Descriptions Web Setting Path
Settings->Auto
Provision->Power
On
Settings->Auto
Provision->PNP
Active
Settings->Auto
provision->Weekly
Settings->Auto
provision->Day of
week