Yealink SIP-T2 Series Provisioning Manual page 100

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
sip.reg_surge_ Integer from
prevention =
sip.send_resp
onse_by_requ
est =
sip.notify_rebo
ot_enable =
syslog.mode
=
syslog.server
IP address
=
or domain
90
Values
It configures the maximum duration (in
seconds) for account register after
startup.
0 to 60
The default value is 0.
It takes effect after a reboot.
It configures from where the phone
retrieves the destination address for
response. The phone will then send all
SIP response messages to the
destination address.
0-from VIA header in the request
0 or 1
message
1-from source address of the request
message
The default value is 1.
It takes effect after a reboot.
It configures the phone behavior when
receiving a SIP NOTIFY message which
contains the header "Event:
check-sync".
0-The phone will reboot only if the SIP
NOTIFY message contains an
0, 1or 2
additional string "reboot=true".
1-The phone will be forced to reboot.
2-The phone will ignore the SIP NOTIFY
message.
The default value is 1.
It configures the phone to export log
files to a syslog server or the local
system.
0-Local
0 or 1
1-Server
The default value is 0.
It takes effect after a reboot.
It configures the IP address or domain
name of the syslog server when
Descriptions Web Setting Path
Network->
Advanced->
Registration
Random->
Registration
Random (0~60s)
Settings->
Configuration->Ex
port System Log
Settings->
Configuration->