Yealink SIP-T2 Series Provisioning Manual page 146

Yealink IP Phones Auto provisioning Guide
Permitted
Parameter
auto_redial.int Integer from
erval =
auto_redial.ti Integer from
mes =
zero_touch.en
able =
zero_touch.wa Integer from
it_time =
push_xml.serv
IP address
er =
push_xml.bloc
k_in_calling =
push_xml.sip_
notify =
features.actio
IP address
n_uri_limit_ip
=
136
Values
It configures the interval (in seconds)
for the phone to wait before redial.
1 to 300
The default value is 10.
It configures the auto redial times
when the called party is temporarily
unavailable.
1 to 300
The default value is 10.
It enables or disables zero touch for
the phone to perform provisioning
during startup.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It configures the duration time (in
seconds) of the phone displaying the
zero-sp-touch configuration screen
1 to 100
when powered on.
The default value is 5.
It configures the IP address of the push
XML server.
The default value is blank.
It enables or disables the phone to
block displaying the push XML screen
when in calling status.
0 or 1
0-Disabled
1-Enabled
The default value is 0.
It enables or disables the phone to use
the push XML via SIP NOTIFY message.
0-Disabled
0 or 1
1-Enabled
The default value is 0.
It configures the IP address of server
from which the phone receives the
or any
action URI requests.
Descriptions Web Setting Path
Features->General
Information->Auto
Redial Interval
(1~300s)
Features->General
Information->Auto
Redial Times
(1~300)
Settings->Auto
Provision->Zero
Active
Settings->Auto
Provision->Wait
Time (1~100s)
Features->Remote
Control->Push XML
Server IP Address
Features->Remote
Control->Block
XML In Calling
Features->Remote
Control->SIP Notify
Features->Remote
Control->Action
URI allow IP List